www.inventronics-light.com/driver-selector
Driver Selector – portfolio of #20-07-25
ClassProduct nameEANIsolationInput voltage ACInput voltage DCNominal output powerNominal output voltageNominal output currentPower factor [λ]Inrush currentMax. ECG no. on circuit breaker 16 A (B)3Efficiency (max.) [%]Ripple (100 Hz) [%]Dimming Interface
Filter: DEXAL or D4i		Touch DIM Corridor functionConstant lumen functionDALI-2 Luminaire / Energy / Diagnostic Data*Programming interfaceProgramming deviceEmergency ModeSuitable for Emergency Lighting2ECG lifetime1 [h]Ta [°C]Tc [°C]PC**Type of protectionLength [mm]Width [mm]Height [mm]Certificates & approbationsStandard pack
[pcs.]
Constant Current | Linear / Area | Dimmable
DEXAL Industry NFC
OTI DX 100/220-240/700 D NFC IND L 🛈
Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 150 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and 1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
Areas of applicationion
  • Linear and area lighting
  • Industry lighting
  • Suitable for luminaires of protection class I
Dimming interface: DALI-2, DEXAL, Corridor
Programming interface: DEXAL, NFC, LEDset
Programming device: DALI magic, NFC Scanner

Type of protection
IP20		Certificates & Approbations
CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i
4062172050883Non isolated198…264 V176…276 V23…100 W64…300 V200…700 mA0.57C…0.98≤ 5.0 A32up to 93< 1DALI-2, DEXAL, CorridorNoProgrammableYesDEXAL, NFC, LEDsetDALI magic, NFC ScannerYesYes100k / 50k-40…+7085IIP20425.030.021.0CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i20
OTI DX 150/220-240/850 D NFC IND L 🛈
Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 150 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Lifetime: up to 100,000 h (temperature at Tc = 75 °C, max. 10 % failure rate)
  • High light quality: 1…100% amplitude dimming and 1% output ripple current
  • Wide operating temperature range: -40…+65 °C
  • High surge protection: up to 4 kV (L-N) / 4 kV (L/N-PE)
  • Integrated inrush current limiter
  • Very high efficiency (up to 96%)
Areas of applicationion
  • Linear and area lighting
  • Industry lighting
  • Suitable for luminaires of protection class I
Dimming interface: DALI-2, DEXAL, Corridor
Programming interface: DEXAL, NFC, LEDset
Programming device: DALI magic, NFC Scanner

Type of protection
IP20		Certificates & Approbations
CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i
4062172050920Non isolated198…264 V176…276 V43…150 W64…300 V250…850 mA0.61C…0.99≤ 5.0 A22up to 95< 1DALI-2, DEXAL, CorridorNoProgrammableYesDEXAL, NFC, LEDsetDALI magic, NFC ScannerYesYes100k / 50k-40…+6585IIP20425.030.021.0CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i20
DEXAL NFC
OTI DX 35/220-240/400 D NFC L 🛈
Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Very high efficiency
  • Protection against 4 kV burst and 1.5 kV surge voltage (L-N)
  • Wide operating range up to 600 mA
Areas of applicationion
  • Linear lighting for office, education, industry, storage areas and retail
  • DEXAL, easy connection to different partner BMS systems
  • Suitable for luminaires of protection class I
Dimming interface: DALI-2, DEXAL, Corridor
Programming interface: DEXAL, NFC, LEDset
Programming device: DALI magic, NFC Scanner

Type of protection
IP20		Certificates & Approbations
CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i
4052899590380Non isolated198…264 V176…276 V4…38 W54…240 V75…400 mA0.45C…0.9618.0 A28up to 90< 4DALI-2, DEXAL, CorridorNoProgrammableYesDEXAL, NFC, LEDsetDALI magic, NFC ScannerYesYes50k / 100k-25…+6075IIP20360.030.021.0CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i20
OTI DX 75/220-240/600 D NFC L 🛈
Product family benefits
  • Versatile non-isolated DEXAL LED driver up to 75 W due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified
  • Prepared for DiiA Specification Parts -250, -251, -252 and -253
  • Fully programmable via T4T software (NFC, DALI Interface)
  • Very high efficiency
  • Protection against 4 kV burst and 1.5 kV surge voltage (L-N)
  • Wide operating range up to 600 mA
Areas of applicationion
  • Linear lighting for office, education, industry, storage areas and retail
  • DEXAL, easy connection to different partner BMS systems
  • Suitable for luminaires of protection class I
Dimming interface: DALI-2, DEXAL, Corridor
Programming interface: DEXAL, NFC, LEDset
Programming device: DALI magic, NFC Scanner

Type of protection
IP20		Certificates & Approbations
CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i
4052899590403Non isolated198…264 V176…276 V6.5…75 W54…240 V120…600 mA0.46C…0.9827.0 A🛈
twidth = 200 µs (measured at 50 % Ipeak)
24up to 93< 4DALI-2, DEXAL, CorridorNoProgrammableYesDEXAL, NFC, LEDsetDALI magic, NFC ScannerYesYes50k / 100k-25…+5575IIP20360.030.021.0CE, EL, VDE-ENEC, VDE-EMC, EAC, CCC, BIS, RCM, D4i20
Constant Current | Compact | Dimmable
DEXAL NFC
OTI DX 25/220-240/700 NFC 🛈
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified incl. Parts 250, 251, 252, 253
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of applicationion
  • DEXAL, easy connection to different partner BMS systems
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Dimming interface: DALI-2, DEXAL, D4i
Programming interface: DALI, NFC
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
ENEC 10, EL, CE, DALI-2, CCC, D4i
4062172017947SELV198…264 V176…276 V7…27 W15…54 V180…700 mA0.67C…0.9715.0 A🛈
twidth = 220 µs (measured at 50 % Ipeak)
2888< 3DALI-2, DEXAL, D4iNoProgrammableYesDALI, NFCDALI, NFCYesYes50k / 100k-20…+5075I, IIIP20103.067.029.5ENEC 10, EL, CE, DALI-2, CCC, D4i20
OTI DX 35/220-240/1A0 NFC 🛈
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified incl. Parts 250, 251, 252, 253
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of applicationion
  • DEXAL, easy connection to different partner BMS systems
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Dimming interface: DALI-2, DEXAL, D4i
Programming interface: DALI, NFC
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
ENEC 10, EL, CE, DALI-2, CCC, D4i
4062172017961SELV198…264 V176…276 V14…35 W15…54 V350…1050 mA0.67C…0.9815.0 A🛈
twidth = 220 µs (measured at 50 % Ipeak)
2890< 3DALI-2, DEXAL, D4iNoProgrammableYesDALI, NFCDALI, NFCYesYes50k / 100k-20…+5080I, IIIP20103.067.029.5ENEC 10, EL, CE, DALI-2, CCC, D4i20
OTI DX 50/220-240/1A4 NFC 🛈
Product family benefits
  • Versatile DALI window driver due to flexible output characteristic
  • Integrated DEXAL Bus power supply for sensors and wireless radios
  • Simplified luminaire design for wireless lighting control system and sensors
  • Locking and unlocking of luminaire/driver data
  • Advanced luminaire/driver data (power, energy, operating hours…) for analytics
  • D4i certified incl. Parts 250, 251, 252, 253
  • Easy and fast output current setting via NFC
  • Very high efficiency
  • High-quality dimming of 1…100 % by amplitude dimming
Versatile scope of application due to DALI Technology:
  • Suitable for emergency Installations (acc. to EN 60598-2-22 and IEC 61347-2-13,appendix J) thanks to DC detection (0 Hz, pulsating DC), on/off switchable
  • Feedback of power consumption and operating hours (Fit for SMART GRID)
  • Suitable for buildings according to EPBD/BREEAM/LEED due to automatic Constant Lumen Output setting
Areas of applicationion
  • DEXAL, easy connection to different partner BMS systems
  • Installation in emergency lighting systems according to IEC 61347-2-13, appendix J
  • Suitable for use in luminaires with flexible current setting
  • Suitable for indoor SELV installations
  • Suitable for luminaires of protection classes I and II
  • Suitable for downlights, spotlights and LED panels
  • Installation via Cable Clamp Kit possible (depending on version of product)
Dimming interface: DALI/DEXAL/D4i
Programming interface: DALI, NFC
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
ENEC 10, EL, CE, DALI-2, CCC, D4i
4062172061865SELV198…264 V176…276 V55 W15…54 V600…1400 mA0.83C…0.9830.0 A🛈
twidth = 200 µs (measured at 50 % Ipeak)
2091< 3DALI, DEXAL, D4iNoProgrammableYesDALI, NFCDALI, NFCYesYes50k / 100k-20…+5080I, IIIP20110.075.025.0ENEC 10, EL, CE, DALI-2, CCC, D4i20
Constant Current | Compact | Dimmable | Outdoor
OT DEXAL
OT DX 40/220-240/1A0 DIMA LT2 E 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • High surge protection: up to 10 kV (1 pulse) in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM
4052899999664SELV198…264 V176…276 V40 W15…56 V200…1050 mA0.59C…0.9926.0 A🛈
At 180 µs
288910AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes100k-40…+5580I, IIIP20133.077.040.0CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM10
OT DX 75/220-240/1A0 DIMA LT2 E 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • High surge protection: up to 10 kV (1 pulse) in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM
4052899999671SELV198…264 V176…276 V75 W35…115 V200…1050 mA0.54C…0.9954.0 A🛈
At 190 µs
129310AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes100k-40…+5585I, IIIP20150.090.040.0CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM10
OT DX 110/220-240/1A0 DIMA LT2 E 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • High surge protection: up to 10 kV (1 pulse) in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM
4052899999688Double198…264 V176…276 V110 W75…220 V200…1050 mA0.73C…0.9965.0 A🛈
At 160 µs
129310AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes100k-40…+6085I, IIIP20170.0100.040.0CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM10
OT DX 165/220-240/1A0 DIMA LT2 E 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 3 %
  • High surge protection: up to 10 kV (1 pulse) in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • Very high efficiency
  • Fulfill safety requirement due to overload, overtemperature, Hot Plug protection
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM
4052899999695Double198…264 V176…276 V165 W130…260 V200…1050 mA0.77C…0.9977.0 A🛈
At 180 µs
99410AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes100k-40…+5590I, IIIP20170.0100.040.0CE, ENEC, VDE, VDE-EMC, CCC, EL, DALI-2, D4i, RCM10
OT DEXAL NFC G2
OT DX 40/170-240/1A0 DIMA NFC G2 CE 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899631649Double170…264 V170…276 V40 W15…65 V150…1050 mA0.77C…0.9927.0 A🛈
At 217 µs
30894AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5575I, IIIP20133.077.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE18
OT DX 75/170-240/1A0 DIMA NFC G2 CE 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899631663Double170…264 V170…276 V75 W35…150 V150…1050 mA0.98, 0.953.3 A🛈
At 3 ms
33934AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5585I, IIIP20150.085.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE12
OT DX 110/170-240/1A0 DIMA NFC G2 CE 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899631694Double170…264 V170…276 V110 W65…230 V150…1050 mA0.99, 0.953.3 A🛈
At 3 ms
29934AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5585I, IIIP20150.085.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE12
OT DX 165/170-240/1A0 DIMA NFC G2 CE 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899631717Double170…264 V170…276 V165 W90…260 V150…1050 mA0.98, 0.953.3 A🛈
At 3 ms
20944AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5595I, IIIP20150.090.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE12
OT DX 200/170-240/1A0 DIMA NFC G2 CE Inventronics Labelled🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899631731Double170…264 V170…276 V200 W140…300 V150…1050 mA0.99, 0.953.3 A🛈
At 3.15 ms
104AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5590I, IIIP20170.0100.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE8
OT DX 24/170-240/0A7 DIMA NFC G2 CE 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
4052899632349Double170…264 V170…276 V24 W12…48 V150…700 mA0.77C…0.9927.0 A🛈
At 217 µs
30894AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+6075I, IIIP20133.077.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE18
OT DX 200/170-240/1A0 DIMA NFC G2 CE Inventronics Labelled🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Electrical interface and data communication fully based on open standards
  • Fully programmable via software (DALI Interface, NFC)
  • Low luminous efficacy tolerance through low output current tolerance of ± 1,5 %
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • Inventronics DALI light- and presence sensor connectable
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
  • BOX Programming: all drivers in one BOX can be programmed in one step
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
6977770432789Double170…264 V170…276 V200 W140…300 V150…1050 mA0.99, 0.953.3 A🛈
At 3.15 ms
104AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5590I, IIIP20170.0100.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE8
OT DEXAL NFC TunableWhite
OT DX 75/170-240/1A0 2C NFC E TW 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Fully programmable via software (DALI Interface, NFC)
  • 2 independent channels, DALI 209 (DT8) and DALI 207 (DT6)
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Optimized NFC for programming from the top: easy accessibility in luminaires
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
6977078991582Double170…264 V170…276 V75 W35…118 V150…1050 mA0.45C…0.993.3 A🛈
At 3 ms
33934AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5590I, IIIP20150.085.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE12
OT DX 40/170-240/1A0 2C NFC E TW 🛈
Product family benefits
  • For Zhaga Book18 Luminaires and D4i certified incl. Parts 25x + AUX
  • Fully programmable via software (DALI Interface, NFC)
  • 2 independent channels, DALI 209 (DT8) and DALI 207 (DT6)
  • Additional built-in ESD protection (EQUI-N, LED Output-EQUI, DEXAL-EQUI)
  • High surge protection: up to 10 kV in protection class I or II
  • Lifetime: up to 100,000 h (depending on Tc temperature, max. 10 % failure rate)
  • Mains input undervoltage protection
  • DEXAL interface (with 15V current supply on DALI-2 lines - DALI Part 250)
  • SELV DEXAL and 24V AUX interface (DALI Part 150) up to 6W
  • Standardized DALI-2 communication (incl. monitoring data, energy metering)
  • Integrated ESD protection: more robust for installation on non-conductive poles
  • Optimized NFC for programming from the top: easy accessibility in luminaires
  • Surge and overvoltage protection on DALI interface for DALI installations
  • Full compatibility with Tuner4TRONIC and T4T Field App
Areas of applicationion
  • Street and urban lighting
  • Industry
  • Suitable for outdoor applications in luminaires with IP 54
  • Suitable for use in outdoor luminaires of protection class I and II
Dimming interface: AstroDIM, DALI/DEXAL/D4i, StepDIM
Programming device: DALI, NFC

Type of protection
IP20		Certificates & Approbations
CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE
6977078997256Double170…264 V170…276 V40 W15…65 V150…1050 mA0.50C…0.9927.0 A🛈
At 217 µs
30894AstroDIM, DALI, DEXAL, D4i, StepDIMNoYesYesn/aDALI, NFCYesYes50k / 100k-40…+5585I, IIIP20150.085.040.0CCC, CE, D4i, DALI-2, EL, ENEC, RCM, VDE12


Tuner4TRONIC®
Software suite for OEM use to configure all programmable OPTOTRONIC®, QUICKTRONIC® and POWERTRONIC® drivers in the luminaire manufacturing process.
  • Best suited for programming in luminaire manufacturing
  • For quick manual as well as automatic programming
  • Works with DALI magic and OT Programmer hardware
  • Easily enables pre-parameterization, also when using the pre-parameterization service
  • Tuner4TRONIC®-Field also contains data for indoor LED drivers (NFC)
  • At maximum Tc = 75°C / 10% failure rate / At Tc = 65°C / 10% failure rate
  • DC voltage range 176 V…276 V
  • General information: The rated MCB current must not be exceeded. The load of the miniature circuit breakers due to the mains input currents of the connected drivers must always be calculated in advance.
  • Acc. DALI part 251, 252 and 253.
  • 1. If the LED driver complies with protection class I, it is suitable for protection class I luminaires.
    2. If the LED driver complies with protection class II, it is suitable for protection class I and class II luminaires.