DALI PRO 2 IoT - FW Update Tool Firmware updates are essential to enhance the functionality, performance, and security of the DALI PRO 2 IoT controller. The Update tool aims to simplify and streamline the firmware update process making it easy and efficient for users. Usage: - Unzip the UpdateTool zip archive into a folder. - Run UpdateTool.exe - Enter the IP-address of the DALI PRO 2 IoT controller on the text input box on the left and click the "Connect" button. - You will be asked to enter the credentials for accessing the controller. - Once connected the tool checks if there is the need for an update: if not then the message "No updates needed" is displayed on the progression bar. - If the need for an update is detected then the message "Update necessary for 'n' Components" is displayed. - To go on with the updates you have to press the "Update" button. - If some part of the update fails please close and start the Update tool again. Importand notes: - Some updates require the reboot of the controller: this is done by the Update Tool that automatically reconnects after the expiration of the proper timeout. - This FW update requires additional time (up to 15 mins) to take effect, so please allow for this time before you start working with your DALI PRO 2 IoT after the FW update. - It might happen that after the reboot the controller gets a different IP-address by the router. In case of connection problems please check if the controller has received a new IP-address via DHCP. In that case you have to close and restart the Update Tool and use the new IP-address to reconnect. https://www.inventronics-light.com/dali-pro-2-iot INVENTRONICS GmbH, Parkring 31-33, 85748 Garching, Germany Copyright © Inventronics 2023